Fuel Oil Distillation Equipment Using Waste Rubber

2. Work Flow 
2.1. Waste Materials (Tires, plastics, etc.) are loaded into the pyrolysis reactor by the Feeding machine or manually and then doors are locked with our tight sealed door lock design.
2.2. System is started with the control panel operated by operator. The process is automatic and controlled by the control system. The first stage of the process is to heat up and dried up the waste. 
2.3. Pyrolysis of the waste materials will begin once the reactor reaches certain temperature and the gas oil is generated from the waste.
2.4. The heavy density of the gas oil falls down into the heavy oil tank, and light oil gas rises up into condensers to be converted into oil and stored in the oil tank. Small quantity of gas which can not be liquefied will be recycled and collected by the recycling system for burning as fuel or stored accordingly after cleanness and other treatment. 

2.5. Flue and smoke emitted into atmosphere after sulphuret, black removal.
2.6. Heating finished, and waiting for about 5 hours for natural cooling (or faster cooking with Nitrogen, CO2). The carbon black will be released by our high speed carbon discharge system automatically and stored in a special tank which is to prevent pollution.
2.7. Steel (for tires contain steel wires) will be removed at the final stage upon the carbon black being fully released. Steel removal requires opening the big door.
2.8. The next batch of process can be continued.